Download Brochure



IP (Ingress Protection)
Code Symbols
The chart below illustrates the use of special symbols in the IP classification system. In the "1st digit" columns, note the grid-like symbols next to numbers 5 and 6. In the "2nd digit" columns numbers 3–8 are symbolized by
teardrop shaped symbols, sometimes enclosed in a box or a triangle, sometimes unenclosed (7–8). These symbols can be placed on equipment to illustrate the IP protection provided.

1st
Digit
Protection from solid objects 2nd
Digit
Protection from moisture
0 Non protected 0 Non protected
1 1
Protected against solid objects greater than 50mm Protected against vertically
dripping water
2 2
Protected against solid objects greater than 12.5mm Protected against dripping water when tilted up to 15°
3 3
Protected against solid objects greater than 2.5mm Protected against spraying water
4 4
Protected against solid objects greater than 1.0mm Protected against splashing water
5 5
Dust protected Protected against jetting water
6 6
Dust tight Protected against powerfully
jetting water
  Note : IEC 60529 does not specify sealing effectiveness against the following: mechanical damage of the equipment; the risk of explosions; certain types of moisture conditions, e.g., those that are produced by condensation; corrosive vapors; fungus; vermin. 7
Protected against powerfully
jetting water
8
Protected against powerfully
jetting water